DVBViewer

[Prinz]

Hi,

I have nearly completely rewritten the DVBViewer plugin. It’s based on the action.ini of the DVBViewer version 4.0.1.60 (beta, downward compatible to 4.0.0.0).

Many additional actions and events are added like update EPG, Windows Task Scheduler actions ....

Additional information can be found in the readme.txt of the attached zip file.

Regards
Prinz

EDIT 06 May 2009, 22:00: New Version

[Bitmonster]

Is the action.ini of any need for the plugin, or is just for informational purposes?

I have no problem, if you take over the development of the old DVBViewer plugin with this new one, as I'm not using DVBViewer regularly. So you can modify it directly in the SVN trunk.

Might be better to move the README into the eg.RegisterPlugin(description=...). Since you can use reStructeredText it shouldn't be hard to reformat such text based layout easily.

[Prinz]

Hi,

Is the action.ini of any need for the plugin, or is just for informational purposes?

It's only for documentation to see on which version the pugin is based.

I have no problem, if you take over the development of the old DVBViewer plugin with this new one, as I'm not using DVBViewer regularly. So you can modify it directly in the SVN trunk.

Thanks, then I will do it.

Might be better to move the README into the eg.RegisterPlugin(description=...). Since you can use reStructeredText it shouldn't be hard to reformat such text based layout easily.

I will think about it. Actual I think, that it will be better to move a part into the plugin description and other parts directly to the description of the command.

After I have done this changes, I will put it onto the SVN trunk.

Best regards
Stefan

[Prinz]

Hi,

you can find the newest checked in version at top of this thread. The README is moved into the plugin description.

Regards
Prinz

[Dal]

Hello.

I try to use this plugin, but I get this error when trying to add it in EG:

Error while configuring: Plugin: DVBViewer
Traceback (most recent call last):
File "D:\Brukerprogrammer\Media\EventGhost\eg\Classes\MainFrame\__init__.py", line 802, in OnCmdAddPlugin
).switch(self.document, pluginInfo)
File "D:\Brukerprogrammer\Media\EventGhost\eg\Classes\UndoHandler\NewPlugin.py", line 42, in Do
if not eg.UndoHandler.Configure().Do(pluginItem, True):
File "D:\Brukerprogrammer\Media\EventGhost\eg\Classes\UndoHandler\Configure.py", line 57, in Do
newArgs = gr.switch(*item.GetArgs())
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 1508, in Configure
onPasswordChange( wx.CommandEvent() )
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 1270, in onPasswordChange
panel.EnableButtons( p1 == p2 )
File "D:\Brukerprogrammer\Media\EventGhost\eg\Classes\ConfigPanel.py", line 294, in EnableButtons
buttonRow.testButton.Enable(flag)
AttributeError: 'NoneType' object has no attribute 'Enable'

The plugin seems to be added, but no context-folder is added.

I use EG v.0.3.6.1487

Thanks.

[Prinz]

Hi,

I use EG v.0.3.6.1487

Sorry I forgot, the actual EG version 0.3.7.r918 is necessary.

Regards
Prinz

[Dal]

Hi,

I use EG v.0.3.6.1487

Sorry I forgot, the actual EG version 0.3.7.r918 is necessary.

Regards
Prinz

Thanks for answering.

But it still doesn't work.
When I try commands from the conext folder, I get this error:

DVBViewer: OSD-Show Timeline
Error in Action: "DVBViewer: OSD-Show Timeline"
Traceback (most recent call last) (918):
File "D:\Brukerprogrammer\Media\EventGhost\eg\Classes\ActionBase.py", line 168, in CallWrapper
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 321, in __call__
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 358, in SendCommandThroughCOM
AttributeError: 'DvbViewerWorkerThread' object has no attribute 'dvbviewer'

[Prinz]

Hi,

DVBViewer: OSD-Show Timeline
Error in Action: "DVBViewer: OSD-Show Timeline"
Traceback (most recent call last) (918):
File "D:\Brukerprogrammer\Media\EventGhost\eg\Classes\ActionBase.py", line 168, in CallWrapper
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 321, in __call__
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 358, in SendCommandThroughCOM
AttributeError: 'DvbViewerWorkerThread' object has no attribute 'dvbviewer'

The line numbers of the error messages doesn't fit to the actual version. Could you check it, that realy the new plugin is located in the directory "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer"?

The new version of the EventGhost contains also this new dvbviewer plugin. Using this new version it's actual not necessary anymore to replace the plugin.

Regards
Prinz

[Dal]

The line numbers of the error messages doesn't fit to the actual version. Could you check it, that realy the new plugin is located in the directory "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer"?

The new version of the EventGhost contains also this new dvbviewer plugin. Using this new version it's actual not necessary anymore to replace the plugin.

Regards
Prinz

Oops, maybe that is the problem.
Will check it out as soon as possible.

[Dal]

Did a reinstall of EG 0.3.7.r918 now, and made sure the plugins catalog was emptied, but still errors:

Show Statusbar
DVBViewer: Show Statusbar
Error in Action: "DVBViewer: Show Statusbar"
Traceback (most recent call last) (918):
File "D:\Brukerprogrammer\Media\EventGhost\eg\Classes\ActionBase.py", line 168, in CallWrapper
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 321, in __call__
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 358, in SendCommandThroughCOM
AttributeError: 'DvbViewerWorkerThread' object has no attribute 'dvbviewer'
Fullscreen
DVBViewer: Fullscreen
Error in Action: "DVBViewer: Fullscreen"
Traceback (most recent call last) (918):
File "D:\Brukerprogrammer\Media\EventGhost\eg\Classes\ActionBase.py", line 168, in CallWrapper
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 321, in __call__
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 358, in SendCommandThroughCOM
AttributeError: 'DvbViewerWorkerThread' object has no attribute 'dvbviewer'

Hmm, I forgot to mention I use DVBViewer Pro v4.1

[Prinz]

Hi,

Did a reinstall of EG 0.3.7.r918 now, and made sure the plugins catalog was emptied, but still errors:
.
.
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 358, in SendCommandThroughCOM

I can't assign this error line numbers to the code of the plugin. Could it be that the plugin file is damaged? The new DVBViewer plugin contains 2673 lines of code. Could you check it?

Could you install the new version (EventGhost_0.3.7.r965_Setup.exe). The new plugin is integrated in this version. In this case, replacement of the plugin is not necessary anymore.

Regards
Prinz

[Dal]

Tried to install r965 now, but now I cannot open EG at all. I get this error:

Traceback (most recent call last):
File "EventGhost.pyw", line 30, in <module>
File "D:\Brukerprogrammer\Media\EventGhost\eg\__init__.py", line 25, in <module>
import stackless
ImportError: No module named stackless

[Prinz]

Hi,

Traceback (most recent call last):
File "EventGhost.pyw", line 30, in <module>
File "D:\Brukerprogrammer\Media\EventGhost\eg\__init__.py", line 25, in <module>
import stackless
ImportError: No module named stackless

I have this problem on my installation also, I think it'a a problem of the installation procedure. I solved this problem in following way:

1. Save the contents of the setting folder into an other directory
2. Deinstall event ghost (the settings folder will be removed)
3. Install the new version of EG
4. Copy the saved files "MyConfig.xml" and "config.py" in the new setting folder

Could you try it in the same way?

Regards
Prinz

[Dal]

Thank you, that did the trick

But still having problems with the DVBViewer plugin, though
This is the error:

OSD-Teletext
DVBViewer: OSD-Teletext
DVBViewer.DVBViewerCouldNotBeConnected
Exception in thread DvbViewerWorkerThread:
Traceback (most recent call last):
File "threading.pyc", line 525, in __bootstrap_inner
File "threading.pyc", line 477, in run
File "D:\Brukerprogrammer\Media\EventGhost\eg\Classes\ThreadWorker.py", line 173, in __MainLoop
File "D:\Brukerprogrammer\Media\EventGhost\plugins\DVBViewer\__init__.py", line 925, in Finish
AttributeError: comObj

Could not connect for some reason.
Could it be because I have another pluging using Com? (Zoom Player). Tried to disable that, didn't help.

Also tried to start DVBViewer via command line. Same error.

[Prinz]

Hi,

could you sent me the files "MyConfig.xml" and "config.py" to my email address. I will sent you the email address by PM.

Regards
Stefan